Slide Products Mold Release Agents

Features

• Econo-Spray® 3 Mold Release

  Non-silicone and paintable
  Food-grade active ingredient

• Urethane Mold Release

  Non-paintable silicone mold release
  Effective for all polyurethanes: rigid, semi-rigid and flexible urethane foams

• Silicone Mold Release

  Food-grade for indirect food contact
  Recommended for food-packaging molding
  Recognized by UL

• DFL Dry Film Lube Mold Release

  Formulated for deep draw molds
  Excellent for most rubber & thermoplastics including ABS, polycarbonate, nylon and vinyl

• SSL Mold Release

  NSF category M1
  Recognized by UL
  Low-cost heavy-duty mold release

• Zinc Stearate Mold Release

  Non-silicone, paintable mold release
  Mold release powder
  Use for polycarbonate, polypropylene, polysulfone and rubber molding

• Epoxease Mold Release

  Non-silicone, synthetic wax-based product
  For epoxy, polyester and phenolic resins
  For injection molding, encapsulating, potting

• Heavy-Duty 10% Mold Release

  Paintable, non-silicone
  Food-grade for indirect food contact
  Slide’s heaviest-duty mold release[

• Quick Silicone Mold Release

  Recognized by UL
  Food-grade for indirect food contact
  Fast-drying on cold and hot molds

• Quick Paintable Mold Release Agent

  Paintable mold release
  Fast-drying on cold and hot molds

• Quick Lecithin Mold Release

  Paintable, non-silicone mold release
  Food-grade active ingredient
  Fast-drying on cold and hot molds

• Polycarbonate Mold Release

  Paintable release, will not interfere with post-molding decorating of parts
  Specifically developed as a release for polycarbonate resin
  Recognized by UL

• Universal Mold Release

  Non-silicone, paintable mold release
  Food-grade active ingredient
  Recognized by UL

• E/S Silicone Mold Release

  Approved for indirect food contact
  Water-based formulation

• Thermoset Mold Release

  Made with synthetic carnauba wax
  Contains no silicones or oils
  Recommended for thermoset plastic resins

• LMR lecithin Mold Release

  Solvent-free dry formulation
  Paintable, non-silicone mold release
  Food-grade active ingredient
  Direct food additive
  Maximum operating temp: 500 F/260 C
  21CFR 184.1400 (GRAS)

• Hi-Temp 1800 Mold Release

  Paintable, non-silicone release contains boron nitride
  Effective release for engineering grade resins, low melting point metals and glass
  Recommended for use with Ultem and other engineering-grade resins

• DuraKote Mold Release for Thermosets

  Semi-permanent release for urethane & epoxy molding
  Curable silicone oil (can be baked or air dried onto the mold surface)
  Paintable when baked on

• Non-Silicone Wax Pattern 3% Mold Release

  3% oil
  Food-grade
  Non-silicone

• Non-Silicone Wax Pattern 5% Mold Release

  5% oil
  Leaves no ash content
  Food-grade

• DuraKote Variation Mold Release

  Semi-permanent release for urethane & epoxy molding
  Curable silicone oil (can be baked or air dried onto the mold surface)
  Paintable when baked on

Summary

The right mold release agent increases production capability and extends the life of your molds, with shortened cycle times that go straight to your bottom line. Material and application-specific formulations that prevent sticking and enable the speedy release of defect-free parts to drive greater productivity for injection or blow molding.

When properly applied to the mold surface, Slide’s aerosol spray mold release agents easily release a variety of plastic resins across many applications, including food and medical. The epoxy release agent creates a barrier between the mold and the resin, preventing the two from sticking together and potentially ruining the mold.

Contact a Thermal Devices’ Sales Engineer for more information! Or, request a quote.