Watlow Pre-Coiled Nozzle Heater 102PS28A4A
The Watlow Pre-Coiled Nozzle Heater 102PS28A4A from Thermal Devices, an authorized Watlow Distributor. The versatile Watlow coil/cable heater can be formed into a variety of shapes. Cable heaters are small diameter, high-performance units, fully annealed and readily bent to a multitude of configurations. The cable heater can be formed into a compact, coiled nozzle heater supplying a full 360 degrees of heat with optional distributed wattage. A straight cable heater can snake through an equipment application. Flat spiral configurations can be used in high-tech manufacturing while a star wound cable can be used for air and gas heating. Different applications require different construction methods, including one, two or four resistance wires; parallel coil or straight wire; drawn or swaged sheaths; with or without internal thermocouples; leads exiting from one or both ends, and round, rectangular or square cable cross sectionals.
Usually Ships in 10-15 days (Expedited lead times may be available, contact sales at 301-831-7550 for more info.)
*Cable heaters over 48″ in length will ALWAYS be shipped COILED on a diameter of approx. 16 – 24 inches*
$322.60
SKU: 102PS28A4AWatlow Pre-Coiled Nozzle Heater 102PS28A4A
Features of Watlow Coil and Cable Heaters:
- High ductility allows the heater to be cold-formed into almost any shape
- Low mass allows for quick response in both heating and cooling
- Capable of operating in unusual environments, including cryogenic and sub-freezing temperatures, high vacuum, gaseous and liquid immersion heaters
- 240V maximum voltage
- Durable construction materials for high-temperature corrosion and oxidation resistance along with ideal expansion properties
Watlow Pre-Coiled Nozzle Heater 102PS28A4A
| Manufacturer | Watlow |
|---|---|
| Product Line | Coil and Cable Heaters |
| Watlow Code Number | 102PS28A4A |
| Lead Time | Usually Ships in 10-15 days (Expedited lead times may be available, contact sales at 301-831-7550 for more info.) |
| Straight Length (in.) | 230 |
| Volts | 250 |
| No-heat Length (in.) | 5 |
| Lead Wire | 0.75 |
| Clamp O.D. (in.) | 1 |
| Clamp Width (in.) | 1.25 |
| Element Configuration | 0.102 Inch Square Cross-Section |
